Description
The Retrofit base support is adjustable from 0mm to 120mm from the wall, it can be used in conjunction with 90° or 135° tees when fitted directly above.
This item can also be used as a load bearing intermediate support on longer flue runs and can be retro fitted to make installation simpler.
One support to be used on most standard single story or 2 storey homes, supporting up to 10m of chimney immediately above the tee. Only recommended fixings should be used.
Description
APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.
CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick. Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3. All parts are fully welded.
Distance to combustibles is 50mm TWPro 60mm on KC
APPROVALS
TWPro is HETAS Approved and is CE marked.
Designation Number
TWPro EN1856-1 T600 N1 W V2 L50040 G50.
TWPro EN1856-1 T200 W V2 L50040 O20.
KC EN1856-1 T600 N1 W V2 L50040 G60.
KC EN1856-1 T200 W V2 L50040 O20.
INSTALLATION
TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.
Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).
Product Details
SKU | 58-150-160 |
Item | TWPro MB Retro Fit Base Support TWPro MB Retro Fit Base Support |
Designation: | EN1856-1 T600 N1 W V2 L50040 TWPro G50/ KC G60 |
System: | TWPro / KC |
Inner Material: | 316L Stainless Steel – 0.40mm thick |
Outer Material: | 304 Stainless Steel – 0.40mm thick |
Fuels: | Wood, Oil, Gas, Low sulpher coal |
Approvals: | HETAS / CE |
Distance to Combustibles: | TWPro 50mm / KC 60mm |