Description

Finishing Plate 45  Degree (1 Piece) Twin Flue

The Round Finishing Plate comes in one complete part and is used to tidy the area around the flue as it passes through a wall. This plate is attached to the wall where the flue is passing through at 45°. Use silicone and screws to secure it against the wall.

High-quality, multifuel, stainless steel twin wall chimney system designed for use with all solid fuel appliances. 
Tested to a maximum operating temperature of 600 degrees C and it comes with a 25 year warranty

APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil and gas boiler and any solid fuel appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.4mm thick. Inner skin is made from 316 grade stainless steel and is 0.4mm thick.
Insulation is compressed rockwool giving a density of 200kg/m3 TWPro / 128Kg/m3.
All parts are fully welded.
Distance to combustibles is 50mm 

APPROVALS
TWPro is HETAS Approved and is UKCA marked.
Designation Number
TWPro EN1856-1 T600 N1 W V2 L50040 G50.
TWPro EN1856-1 T200 W V2 L50040 O20.

MANUFACTURER WARRANTY
25 Year Conditional Warranty on product
2 years on paint finish

INSTALLATION
TWPro Twin Wall Insulated Chimney parts are secured together by using a Locking Band.
Make sure that you keep the required distance from the outside of the flue to any combustible material (wood, plaster board).